Selecteer uw taal nl en de fr c0 c1
0
0
Winkelwagen
€ 0,00
Assortiment / Video /

Extron SW6 CV MX Six Input, Dual Output Composite Video, Vertical Interval (NTSC/PAL/SECAM) Switcher

Extron SW6 CV MX Six Input, Dual Output Composite Video, Vertical Interval (NTSC/PAL/SECAM) Switcher

Extron SW6 CV MX Six Input, Dual Output Composite Video, Vertical Interval (NTSC/PAL/SECAM) Switcher

Artikelnummer

SH-10946 

Gewicht   

2,500 KG

Standaard levertijd

3-5 werkdagen

€ 29,95 *
Prijs per stuk

Voorraad : 1

Aantal: 
Bestellen
 

Extron SW6 CV MX Six Input, Dual Output Composite Video, Vertical Interval (NTSC/PAL/SECAM) Switcher. Incl. 19" brackets. In goede staat.



- 2dehands product. (3)




Video
Gain Unity
Bandwidth 30 MHz (-3dB)
Differential phase error 0.01º, 4.43 to 30 MHz
Differential gain error 0.03%, 4.43 to 30 MHz
Crosstalk -70dB @ 3.58 MHz
Switching speed 160 nS (max.)
Video input
Number/signal type 6 S-video: SW 6 SV MX, SW 6 SV A MX
6 composite video: SW 6 CV MX, SW 6 AV MX
Connectors 6: 4-pin mini-DIN female SW 6 SV MX, SW 6 SV A MX
6 BNC female: SW 6 CV MX, SW 6 AV MX
Minimum/maximum levels Analog: 0.3V to
1.5V p-p with no offset
Impedance 75 ohms (all inputs are terminated at 75 ohms)
Return loss -41dB @ 5 MHz
External sync (genlock) 0.3V to 0.4V p-p
Video output
Number/signal type Individually buffered
2 S-video: SW 6 SV MX, SW 6 SV A MX
2 composite video: SW 6 CV MX, SW 6 AV MX
Connectors 2: 4-pin mini-DIN female SW 6 SV MX, SW 6 SV A MX
2 BNC female: SW 6 CV MX, SW 6 AV MX
Minimum/maximum levels Analog: 0.3V to 1.5V p-p
Impedance 75 ohms
Return loss -47dB @ 5 MHz
DC offset ±5mV maximum with input at 0 offset
Switching type Vertical interval
Sync
Genlock connectors 2 BNC female
Standards NTSC, PAL, SECAM
Input level 0.3V to 5.0V p-p: SW 6 SV A MX
0.5 to 5.0V p-p: all other models
Output level TTL: 4V to 5V p-p
Polarity Positive or negative (follows input)
Audio — SW 6 SA MX, SW 6 SV A MX, and SW 6 AV MX only
Gain Unbalanced -15dB to +9dB,: balanced -9dB to +15dB
Frequency response 20 Hz to 20 kHz, ±0.05dB
THD + Noise 0.03% @ 1 kHz, 0.3% @ 20 kHz: at rated maximum output drive
S/N >90dB at rated maximum output drive
Crosstalk <-65dB @ 20 kHz,: <-80dB @ 1 kHz or below 60 Hz, fully loaded
Stereo channel separation >80dB @ 20 Hz to 20 kHz
CMRR >75dB @ 20 Hz to 20 kHz
Audio input — SW 6 SA MX, SW 6 SV A MX, and SW 6 AV MX only
Number/signal type 6 stereo, balanced/unbalanced
Connectors 6: 3.5 mm captive screw connectors, 5 pole
Impedance
     SW 6 SV A MX >10 kohms unbalanced, >20 kohms balanced, DC coupled
     SW 6 SA MX, SW 6 AV MX >25 kohms balanced, 50 kohms unbalanced, DC coupled
Maximum level +15dBu, (balanced or unbalanced) at stated %THD+N
Input gain adjustment -15dB to +9dB, adjustable per input
Audio output — SW 6 SA MX, SW 6 SV A MX, and SW 6 AV MX only
Number/signal type 2 stereo, balanced/unbalanced
Connectors 2: 3.5 mm captive screw connnectors, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±0.1dB channel to channel
Maximum level (Hi-Z) >+21dBu, balanced or unbalanced at stated %THD+N
Maximum level (600 ohm) >+15dBm, balanced or unbalanced at stated %THD+N
Control/remote — switcher
Serial control port RS-232, 9-pin D female connector
Baud rate and protocol 9600, 8-bit, 1 stop bit, no parity
Serial control pin configurations 2 = TX, 3 = RX, 5 = GND
Contact closure 9-pin D female
Contact closure pin configurations 1 = input 1, 2 = input 2, 5 = GND, 6 = input 3, 7 = input 4, 8 = input 5, 9 = input 6

Webshop design Online Webservices

Deze website gebruikt cookies om het bezoek te meten, we slaan geen persoonlijke gegevens op.